Details
Feature
Dual-signal wires version, signal break-point continuous transmission. If one led is damaged, it will not affect the other LEDs working.
With 4-pins male connector and separated power/ground wire at both ends for easy interconnection and power connection.
Waterproof IP67: the ribbon light is covered with silicone protective sleeve, which can protect it well and makes it easy to clean.
Individually addressable: Every 1 IC control 1 LEDs, every LED can be individually addressable and show any color you want. The strip can be cut off between every one LED without damaging the rest strip if you want it to shorten or lengthen, also can be re-connect by provided connectors.
The digital LED WS2815 fully color integrates all electronic components into a single 5050 luminaire, without the need for any other peripheral electronic components to assist in forming a complete internal control pixel.in the meanwhile,the WS2815 LED strip reduces resistance caused by inverting the product during installation.
Wide compatibility. Works great with LED screnn, LED wall, advertising board, and widely apply for KTV, hotel, bars, clubs, wedding party lighting, etc.
Specifications
LED Resource:5050 SMD RGB
IC Type: WS2815 IC
Input Voltage:12V DC
Power:18W/M,90W/Roll
LED Quantity:60LED/m, total 300 LEDs, each LED is separately controlled
IC Quantity:60 IC/meter (1 IC drives 1 led chip)
Dimensions:L500cm(196.8 in ) x W1.0cm(0.39 in ) x H0.25cm(0.10 in )
Waterproof:Pls Choose, Non-waterproof or IP65 or IP67 or IP68
Cuttable:Every one LED is cuttable
Colors:Full-color RGB, dream color changing
FPC color:WHITE /BLACK PCB
Lumen Per LED:20~22Lumen 6600lm Max /16.4ft
Working Temperature:-4°F (-20°C) ~ 122°F (50°C)
Storage Temperature:-40°F (-40°C) ~ 176°F (80°C)
Beam Angle:120 degrees
Lifespan:≥50000hrs
Warantty:3 years
Technical Features
The control circuit and RGB chip are integrated into 5050 components, to form an external control pixel
Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of the waveform of the signal takes place.
Refresh Frequency updates to 2 KHz. It supports the lower frequency and inexpensive MCU.
Any two points the distance less than 3m transmission signal without any increase circuit
The data transfer protocol uses a single NZR communication mode. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission.
The BIN receives the data signal, which ensures that any the IC's damage does not affect the signal cascade transmission and make the BIN in the state of receiving signal until the restart after power-off.
Package Included:
1 roll of DC 12V WS2815(Upgraded WS2812B) 5M 300Leds Individually Addressable Digital Dual Signal Wires Programmable 5050 RGB Light
CE and RoHS approved
Shipping & Delivery